AirSense 10 CPAP
A comfortable start The AirSense 10 CPAP machine is designed to help you comfortably adjust to sleep apnea therapy. Featuring a sleek design and advanced comfort technology, the AirSense 10 CPAP machine will help you stay on track with your day-to-day sleep apnea therapy.

CREATIVE MEDICAL DEVICES is the best Supplier, Importer and Service provider of CPAP & BiPAP Machine in New Delhi India.


Key features

  • Press start and go. The AirSense 10 CPAP machine has been designed to make therapy easy. With no complicated settings or menus to navigate, simply press Start and you’re ready to go.
  • The quiet Easy-Breathe motor makes for a peaceful environment for you and your bed partner.
  • The user-friendly controls, intuitive interface and color LCD screen make it simple to navigate menus and customize comfort settings.
  • The SmartStart™ function begins your sleep apnea therapy as soon as you breathe into your mask. When you remove your mask, it stops automatically after a few seconds.
  • The built-in ambient light sensor adjusts to the brightness of the room. So if you need to get up during the night, the screen’s back light won’t disrupt your bed partner. The light also turns off automatically, so you can settle back to sleep without disturbance.


TECHNICAL SPECIFICATIONS

  • 90W power supply unit 
  • AC input range: 100–240V, 50–60Hz 1.0–1.5A, Class II 
  • 115V, 400Hz 1.5A, Class II (nominal for aircraft use) 
  • DC output: 24V 3.75A
  • Typical power consumption: 53W (57VA)
  • Peak power consumption: 104W (108VA)


Environmental conditions

Operating temperature: +41°F to +95°F (+5°C to +35°C)

Note: 
The air flow for breathing produced by this therapy device can be higher than the temperature of the room.
Under extreme ambient temperature conditions (104°F/40°C) the device remains safe.
Operating humidity: 10 to 95% relative humidity, non-condensing
Operating altitude: Sea level to 8,500' (2,591 m); air pressure range 1013 hPa to 738 hPa
Storage and transport temperature: -4°F to +140°F (-20°C to +60°C)
Storage and transport humidity: 5 to 95% relative humidity, non-condensing

Electromagnetic compatibility 

  • The AirSense 10 complies with all applicable electromagnetic 
  • compatibility requirements (EMC) according to IEC60601-1-2:2007, for residential, commercial and light industry environments.
  • It is recommended that mobile communication devices are kept at least 1 m away from the device.
  • Information regarding the electromagnetic emissions and immunity of this ResMed device can be found on www.resmed.com, on the Products page under Service and Support.
  • IEC 60601-1:2005 classification Class II (double insulation), Type BF, Ingress protection IP22.


Sensors
Pressure sensor: Internally located at device outlet, analog gauge pressure type, -5 to +45 cm H2O
Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min

Maximum single fault steady pressure
Device will shut down in the presence of a single fault if the steady state pressure exceeds: 
30 cm H2O for more than 6 sec or 40 cm H2O for more than 1 sec.

A. Manual CPAP
Product Description:

Manual CPAP is a whisper quiet, elegant and comfortable therapy system for the treatment of Obstructive Sleep Apnoea (OSA). Machine provides Continuous Positive Airway Pressure (CPAP) with Easy-Breathe Expiratory Pressure Relief (EPR) to prevent the collapse of your upper airway during sleep. Manual CPAP uses the latest, easy to use technology to enhance your breathing comfort and reduce system noise. Designed for a more natural breathing experience, the S9 Elite's enhanced Easy-Breathe technology delivers unrivalled, whisper quiet therapy from the device and the mask. This means a more restful night for both you and your partner.

About the Product:
Intuitive design. Mask-fit system. Optional climate control. Heated humidifier slimline or (optional) climateline tubing. Epr with easy-breathe technology. Smart start /smart stop. Auto altitude adjustment. On-display advanced data reporting
Warranty Information: 2 Years


B. Auto CPAP:
I. Resmed S9 Escape Auto CPAP:

Product Description
ResMed S9 Escape AutoTM CPAP Machine With Hospital Full Face Mask This is an auto-adjusting CPAP machine that provides variable pressures throughout the night to determine the optimal pressure setting you need in certain body positions or stages of sleep where more pressure may be needed. The ResMed S9 Escape AutoTM combines an intelligent algorithm with Easy-Breathe expiratory pressure relief (EPRTM) to dynamically adjust pressure for maximum comfort. Designed for a more natural breathing experience, the S9 Escape Auto delivers whisper-quiet therapy in a smooth waveform. The heated humidifier provides you with climate control to assist in dryness or irritation from direct pressure of the CPAP machine.This means a more restful night for both you and your partner. With its sleek contours and compact size, the S9 Escape Auto looks as natural at your bedside as a clock radio.
I. Resmed S10 Airsense Autoset:


Sound

  • Pressure level measured according to ISO 17510-1:2007 (CPAP mode): 
  • SlimLine: 26.6 dBA with uncertainty of 2 dBA 
  • Standard26.6 dBA with uncertainty of 2 dBA 
  • Power level measured according to ISO 17510-1:2007 (CPAP mode): 
  • SlimLine: 34.6 dBA with uncertainty of 2 dBA 
  • Standard: 34.6 dBA with uncertainty of 2 dBA 
  • Declared dual-number noise emission values in accordance with ISO 4871:1996. 
  • Physical - device and water tub 
  • Dimensions (H x W x D): 4.57" x 10.04" x 5.91" (116 mm x 255 mm x 150 mm) 
  • Air outlet (complies with ISO 5356-1:2004): 22 mm 
  • Weight (device and standard water tub): 44 oz (1248 g) 
  • Weight (device and cleanable water tub): 44 oz (1248 g) 
  • Housing construction: Flame retardant engineering thermoplastic 
  • Water capacity: To maximum fill line 380 mL 
  • Standard water tub - material: Injection molded plastic, stainless steel and silicone seal 
  • Cleanable water tub - material: Injection molded plastic, stainless steel and silicone seal 

Temperature 

Maximum heater plate: 
154°F (68°C) 

Cut-out: 
165°F (74°C) 

Maximum gas temperature: 106°F ( 41°C) 

Air filter Standard: 
Material: Polyester non woven fiber 

Average arrestance: >75% for ~7 micron dust
Hypoallergenic: Material: Acrylic and polypropylene fibers in a polypropylene carrier Efficiency: >98% for ~7-8 micron dust; >80% for ~0.5 micron dust


Aircraft use
ResMed confirms that device meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160, section 21, category M) for all phases of air travel.
Wireless modulE


Technology used:
CDMA (USA and Canada only) 2G GSM (all regions except USA and Canada) 

FCC ID: 2ACHL-AIR10CD
The AirSense 10 device complies with FCC Rules.
The AirSense 10 device should be used at a minimum distance of 0.8" (2 cm) from the body during operation. Additional information regarding the FCC Rules for this device can be found on www.resmed.com.


Operating pressure range
AutoSet, AutoSet For Her, Elite, CPAP 4 to 20 cm H2O Supplemental oxygen
Maximum flow: 4 L/min


Pneumatic flow path
1. Flow sensor
2. Blower
3. Pressure sensor
4. Mask
5. Air tubing
6. Water tub
7. Device
8. Inlet filter Design life Device, power supply unit:5 years Cleanable water tub: 2.5 years Standard water tub, air tubing: 6 months

III. Philips Remstar A-Flex Auto CPAP


Product Features

  • The PR Auto with A-Flex includes a carrying case, travel bag, memory card, manuals and now comes packaged with the Respironics Performance Tubing.
  • System One Humidity ControL
  • The PR CPAP humidifier and water chamber design are breakthroughs for managing rain-out and water damage. System One Humidity Control technology analyzes ambient temperature and patient airflow to reach relative humidity at the mask. Choose from 5 levels of relative humidity.
  • System One is the first humidifier in the industry which accounts for room humidity. Sensors inside and outside the CPAP machine closely monitor changes in humidity and prevents condensation from forming inside the tube.
  • Dry Box technology is another breakthrough in reducing water damage to the CPAP.
  • Several unique designs are incorporated into the humidifier to prevent water from exiting the chamber. To start, the air outlet port has been moved from the side of the humidifier onto the top. This centers the entire delivery; minimizing the total water displacement around the hole. The water chamber is outfitted with one-way valve, between the machine and the humidifier. Any water that manages to escape the chamber gets trapped within the Dry Box, which acts as a reservoir for any water ingress past the valve.
  • System One and Dry Box Technology make it possible for the PR CPAP machines to be truly spill-free. This humidifier, even with a chamber filled to the "Full" indicator line, can be tilted, shaken, and even turned upside down without water leaking back into the device.
  • System One Resistance Control
  • Respironics wanted a machine to achieve optimal pressure no matter which mask is used. Resistance Control is the solution, a numbering system on all of Respironics CPAP masks based on variable resistance characteristics. Each number instructs the device to compensate for different mask types. The result? A consistent and reliable pressure enhanced with all the benefits of Flex Technology no matter which mask is used.
  • Advanced Event Detection
  • The PR Auto CPAP is designed to identify symptoms beyond classic OSA parameters such AHI, flow limitation, Hypopnea, Obstructive and Central Apnea. With the PR system, detection is expand to include data on Snoring, Periodic Breathing and Respiratory Effort-Related Arousals (RERAs).
  • RERAs differ from a Hypopnea event in that a RERA shows increasing respiratory effort with each breath, culminating in a shift in brain wave activity and not necessarily a result of obstruction. Periodic breathing conditions such as Cheyne-Stokes respiration and central apneas are distinguishable from obstructed apnea or snoring events.
  • Flex Family Technology
  • Flex Technology is designed to enhance traditional CPAP therapy; maintaining effective therapy at minimal pressures. Users new to CPAP equipment find the Flex feature provides airflow at just the right pressure relief for every breath and makes adapting to CPAP therapy easier. The PR Auto comes with both C-Flex and A-Flex modes as well as the new C-Flex Plus technology.
  • C-Flex offers a comfortable way to deliver sleep therapy by giving pressure relief at exhalation. Pressure is lowered based on a breath-per-breath analysis and provides up to 3 levels of relief based on the patient's expiratory flow.
  • C-Flex Plus is a new enhancement added to PR Pro and Auto CPAP machines. Similar to C-Flex, the technology provides pressure relief during exhalation based on expiratory flow. C-Flex+ minimizes the pressure transition and provides additional comfort when in fixed-CPAP mode. In addition, C-Flex+ softens the breathing cycle between inhalation to exhalation.
  • A-Flex is a comfort feature built on top of the REMstar Auto algorithm. If breathing events occur, the algorithm raises the A-Flex pressure profile to eliminate breathing events, while simultaneously making sure that pressure never rises to a level that's unnecessarily or uncomfortably high.
  • Encore Data Management and Reporting
  • On-board memory has been added to the CPAP as well as storing information on a generic SD Memory card and reads through any SD card reader. Use EncoreViewer Software to monitor therapy effectiveness through a series of reports. A new Patient Flow and Event report enables users to view a weekly breakdown on per-breath basis. Patient data is used to identify particular conditions and events with specific colors.
  • Another PR System One Machine Option
  • Interested in a system that includes a heated hose? The PR System One REMStar 60 Series Auto CPAP with Heated Humidifier and Heated Tube comes with the same great features as the System One Auto featured on this page. However, the 60 Series Auto also offers an updated humidifier and adds a heated hose to the system to provide optimum humidification for comfort and effective therapy.

 

BiPAP Machine :
I. Resmed Lumis 100 VPAP S:

Product Description
Personalised ventilation made easy
Lumis™ 100 VPAP S is a non-invasive ventilator designed to provide personalised ventilation to support your respiratory condition.


Key features
Individually responsive with Intelligent
Air IntelligentAir is a collection of ResMed technologies that can tailor therapy to your individual breathing needs
Vsync, TiControl™ and Trigger and cycle are technologies that work together to manage any mask leak, synchronise with your breathing, and encourage you to breathe spontaneously – so you can receive the right level of ventilation as you need it.
Elegant, user-friendly design. Designed with you in mind, Lumis is easy to navigate and use.

Climate Control Auto for automatic humidification. When used with a HumidAir™ heated humidifier and ClimateLineAir™ heated tube, Lumis delivers humidification automatically – no settings to change and no complicated menus to navigate.
Ramp for extra comfort. Lumis offers a Ramp feature to help you ease into each therapy session.


TECHNICAL SPECIFICATIONS
Modes Operating pressure range 
CPAP, S2–25 cm H2O (2–25 hPa) in S mode
4–20 cm H2O (4–20 hPa) in CPAP mode
Sound pressure level 26.6 dBA with uncertainty of 2 dBA as measured 
according to ISO 17510-1:2009 (CPAP mode)


Dimensions (H x W x D)
116 mm x 205 mm x 150 mm (Device only)

116 mm x 255 mm x 150 mm (Device with Air humidifier)


Weight
1106 g (Device only)

1268 g (Device with HumidAir humidifier)
90W power supply unit

Input range: 100–240V, 50–60Hz, 57VA (typical power consumption)

108VA (peak power consumption)

Operating temperature/ humidity/altitude +5°C to +35°C/ 10–95% relative humidity, non-condensing/ Sea level to 2,591 m; air pressure range 1013 hPa to 738 hPa

Storage and transport temperature/humidity 
-20°C to +60°C/ 5–95% relative humidity, 

non-condensing Housing construction
Flame retardant engineering thermoplastic
Supplemental oxygen
Recommended maximum flow: 15 L/min (CPAP, S)
Standard air filter

Polyester non-woven fibre Tubing Slim Line™ and Climate Line Air (15 mm); 
Standard (19 mm)


Air outlet 22 mm air outlet complies with ISO 5356-1:2004

 Electromagnetic compatibility Requirements (EMC) according to IEC60601-1-2:2007 for residential, commercial, and light industry environments 

Aircraft use

ResMed confirms that device meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160, section 21, category M) for all phases of air travel IEC 60601-1: 2006 classification Class II (double insulation), Type BF Ingress protection IP22

 

II. Resmed Lumis 150 VPAP ST:
Product Description

Personalised ventilation made easy
Lumis 150 VPAP ST is a noninvasive ventilator designed to provide personalised ventilation to support your respiratory condition.
Featuring iVAPS (intelligent Volume-Assured Pressure Support) mode, Lumis 150 VPAP ST maintains ventilation at an alveoli level to suit your changing needs.
And with an intelligent Backup Rate (iBR) and optional AutoEPAP technology, iVAPS continuously monitors your ventilation and your upper airway.


Key features:-

  • Individually responsive with IntelligentAir
  • IntelligentAir is a collection of ResMed technologies that can tailor therapy to your individual breathing needs:
  • iVAPS learns your unique alveolar ventilation, sets appropriate targets, then provides smooth pressure support to suit.
  • intelligent Backup Rate (iBR)* gives you maximum opportunity to trigger the ventilator. Staying out of the way until you need it (i.e. if you cannot trigger the ventilator), iBR adds backup breaths to comfortably bring you back to target. *Available in iVAPS and ST modes.
  • AutoEPAP** monitors your upper airway and auto-adjusts the expiratory pressure delivered to address any (blockages) obstructions. **Available in iVAPS mode.
  • Vsyn TiControl™ and Trigger and cycle are technologies that work together to help manage any mask leak, synchronise with your breathing, and encourage you to breathe spontaneously – so you can receive the right level of ventilation as you need it.
  • Elegant, user-friendly design. Designed with patients like you in mind, Lumis is easy to navigate and use.
  • Climate Control Auto for automatic humidification. When used with a HumidAir™ heated humidifier and ClimateLineAir™ heated tube, Lumis delivers humidification automatically – no settings to change and no complicated menus to navigate.
  • Ramp and Ramp Down for extra comfort. Lumis offers both Ramp and Ramp Down features to help you ease into and out of each therapy session.

 

III. Resmed S9 Auto 25:
Product Description

The S9 Auto 25 delivers an auto-adjusting EPAP and pressure support to OSA patients with varying night-to-night pressure needs. Utilising the proven, Enhanced AutoSet algorithm, the device can detect a number of breathing events including central apnoeas and respond to obstructions or flow limitations appropriately. Based on the award-winning S9 platform, the S9 Auto 25 provides comfortable therapy in one intuitive and easy-to-use system.


Key features

  • Climate Control, with the H5i heated humidifier and ClimateLineMAX tube, maintains ideal humidification according to real-time environment.
  • Easy-Breathe motor offers the quietest therapy available.
  • Easy-to-use controls and color LCD make menu navigation simple and intuitive.
  • SlimLine and ClimateLine tubes are exceptionally slim and lightweight, virtually eliminating tube drag.
  • VAuto mode incorporates enhanced AutoSet technology with central sleep apnea (CSA) detection.
  • Easy-Breathe EPR (expiratory pressure relief) adjusts pressure on exhalation for maximum comfort in both CPAP and VAuto modes.


IV. Philips Remstar BiPAP Pro:
Product Description

Made in the USA
Auto dimming LED helps create a darker room for easy sleeping
Compliance meter breathing detection
Easy to remove and attach humidifier
Includes the Respironics Performance Tubing
Optional Heated Tubing is available

The Philips-Respironics "System One" BiPAP Pro with Bi-Flex takes a smarter approach to the entire sleep management process. New features such as resistance control, advanced event detection, upgraded data management and reporting, Bi-Flex, Dry Box technology, and System One humidity control put this CPAP machine on the cutting edge. 


Bi-Flex
Bi-Flex pressure relief technology offers pressure relief at inhalation and exhalation to make BiPAP therapy more like natural breathing. By tracking each breath, Bi-Flex pressure relief technology delivers pressure relief at three critical points in the breathing cycle: 
1.the transition from exhalation to inhalation
2.the transition from inhalation to exhalation
3.during exhalation


The System One resistance control allows the patient to tell the machine what type of mask you are using such as a nasal, full face, or nasal pillow. The machine then makes adjustments for optimal flow depending on your mask. Each Respironics mask will now come with a resistance control setting letting you know how to set your machine to match your mask.


Event Detection
Philips-Respironics has upgraded their event detection algorithm to include data on Snoring, Periodic Breathing (PB), Respiratory Effort-Related Arousals (RERAs), Apnea Hypopnea Index (AHI), leak, Clear Airway Apnea (CA), Obstructed Airway Apnea (OA), and Hypopnea (HY). The BiPAP Pro will also record Patterns of use and Flow waveform data. With this information, your physician will be able to better determine the best possible solutions for your sleep therapy.


Data Collection
The PR System One uses a SD card for data collection. Prior to the System One, patients were required to use a specialized card reader when uploading sleep data to a computer. Philips-Respironics has made this process easier by using the standard SD card, giving the patient the ability to use any SD reader to upload sleep data.


Humidification
Philips-Respironics also listened to user feedback when designing the System One Heated Humidifier. A cleverly designed water chamber works with a built in Dry Box to virtually eliminate water getting into the machine during normal use. Even with a water chamber filled to the FULL line, the machine can be tilted and even turned upside down without leaking water back into the unit*. Furthermore, System One Humidity Control monitors room temperature, room humidity, and flow to determine what is required to maintain your selected humidity setting, even when environmental conditions change. Because of this, you can be assured that your therapy comfort will be maximized by virtually eliminating rain-out and condensation buildup in the tubing. 


* PLEASE NOTE: ALWAYS drain your water chamber completely when transporting or moving your machine.


Specification:-
Machine TypeBiPAP/BiLevel
Brand/Manufacturer:Respironics
Weight:4.2 lb
Dimensions:7" x 11" x 4"
Noise Level:29 dB
Warranty:2 year
Data Card:Yes
Software Available:Yes
Ramp:0 to 45 min. (5 min. increments)
Exhalation Relief:Bi-FLEX
Pressure Range:4-20 cm/H2O
Altitude Adjustment:Automatic
Passover Cool Humidifier:Available
110 Voltage:Yes
220 Voltage:Yes
Can Use A Battery:Yes
Integrated Battery:No
Mask Off Alert:Yes
Included In Box:CPAP machine and heated humidifier, performance tubing, AC power cord, 2 filters, user manual, SD card, side cover, and carrying case.
Product Condition:New
Other Information:Made in the USA. Data Card storage On-board: up to 6 months, SD card: up to 1 year


V. Philips Remstar BiPAP Auto BiPAP:
Product Description
Optional heated tubing available


Event Detection
Philips Respironics has made even more improvements to the already technologically advanced 60-Series of BiPAP units. The new look on the outside may be the first noticeable change but the new Respironics BiPAP Auto offers even more for the patient as well as the therapist and/or physician for optimal therapy. The user can look forward to many nights of peaceful and compliant rest with the redesigned Respironics REMstar BiPAP Auto with Humidifier. There can always be an assurance of quality and advances with the Respironics brand, which is delivered through innovative market and technological research proven to be among the best.


Managing the compliance is easily accomplished by the therapist with the newest additions Respironics has introduced to the 60-Series units. Your clinician can make more tailored adjustments to ensure the best possible IPAP and EPAP are dispensed during therapy with the new PSmin feature. By adjusting the PSmin feature the clinician can be sure the user receives compliant therapy that works.


The same great characteristics featured on 50-Series of REMstar units are still available along with updates and new technology. One of the most attractive new features is the heated tubing option which assists the already advanced humidity control system. The heated tube capability is an added trait that tackles the condensation a patient may experience due to environmental elements along with therapy pressure. With this addition, the user will have a major decline of water buildup in the tubing to virtually no buildup at all. The heated tubing is optional and only improves upon already comprehensive temperature management system built into the Respironics units.
With the Advanced Event Detection therapy management system, the user can rest peacefully knowing the unit is doing all the monitoring during therapy. Not only is the unit recording and saving data such as snoring, leaks, apneas, hyponeas, and so on, the unit is adjusting to the user needs as therapy patterns change. The unit will automatically react to events such as apneas or hyponeas by increasing or decreasing pressures adjusting to current requirements. Sleep therapy is administered based on clinical settings to make certain the patient receives the best possible sleep while in compliance. The user will not be alarmed by sudden pressure changes but will continue to rest while the unit provides optimal therapy. 


The user friendly unit allows the patient to input data that will assist in therapy for the most favorable treatment experience. Input data includes mask type such as nasal or full face mask that will be used during therapy. The Respironics REMstar BiPAP Auto will use the input of this information to make therapy adjustments that will optimize the treatment for best air flow.


* PLEASE NOTE: ALWAYS drain your water chamber completely when transporting or moving your machine. 

Specification:-
Machine TypeBiPAP/BiLevel
Brand/Manufacturer:Respironics
Weight:4.2 lb
Dimensions:7" x 11" x 4"
Noise Level:29 dB
Warranty:2 year manufacturer
Data Card:Yes
Software Available:Yes
Ramp:0 to 45 min. (5 min. increments)
Exhalation Relief:Bi-FLEX
Pressure Range:4-25 cm/H2O
Altitude Adjustment:Automatic
Passover Cool Humidifier:Available
110 Voltage:Yes
220 Voltage:Yes
Can Use A Battery:Yes
Integrated Battery:No
Mask Off Alert:Yes
Included In Box:CPAP machine and heated humidifier, tubing, AC power cord, 2 filters, user manual, SD card, side cover, and carrying case.
Product Condition:New
Other Information:Made in the USA. Data Card Storage On-board: up to 6 months, SD card: up to 1 year


VI. Philips Remstar BiPAP ST:
Description:
Noninvasive home ventilator
Philips Respironics, a pioneer in noninvasive ventilation (NIV) and a global leader in the respiratory medical device market, introduces the next generation BiPAP S/T ventilatory support system.
By combining Respironics' proven bi-level technology with a new, improved platform, the NIV system rated "Best Brand"* by homecare providers just got better for clinicians and patients.


The new BiPAP S/T homecare ventilator is cleared for use with patients as young as seven years of age and who weigh more than 40 pounds.


Benefits:
For patients, the updated BiPAP S/T delivers NIV therapy by way of a smaller, lighter, and quieter platform. Improved humidification adds to patient comfort as well.
For clinicians, BiPAP S/T incorporates Respironics' advanced technologies such as Digital Auto-Trak Sensitivity, adjustable RiseTime, and integrated alarms that help provide the best possible patient care. New wired and wireless connectivity options allow a clinician to stay in touch more closely with their patient and the device.
Do you know about BiPAP AVAPS, the noninvasive homecare ventilator that automatically adapts to a patient's changing needs?


VII. Philips Remstar AVAPS:
Product Description


Features

  • At home noninvasive ventilation device
  • Available in S (Spontaneous), ST (Spontaneous Time), PC (Pressure Control), and T (Timed) modes
  • System One Humidity Control with optional heated humidifier
  • Quite operation, 30 dBA at 10 cmH2O
  • The Philips Respironics PR System One BiPAP AVAPS is a noninvasive home ventilator used for the most complex sleep breathing disorders. Philips Respironics used all the features of the System One Series machines in the BiPAP AVAPS; features like Humidity Control, Digital Auto-Trak Sensitivity, BiFlex pressure relief, and the SD data card for use with EncorePro or EncoreAnywhere software. 
  • The BiPAP AVAPS operates at a quiet 30 dBA, is light weight at only 3 lbs., and is small enough for easy travel at 7”L x 5.5”W x 4”H. It offers S, ST, PC, and T modes. IPAPmin is from EPAP to IPAPmax, IPAPmax is from IPAPmin to 25 cmH2O. Target tidal volume is 200 to 1500 ml. Ramp is 0 to 45 minutes and Breath Rate is 0 to 30 BPM. The BiPAP AVAPS homecare ventilator is cleared for use with patients as young as seven years of age who weigh more than 40 pounds.
  • This machine is used for treatment of various sleep disorders such as neuromuscular, COPD, and obesity hypoventilation. If you are unsure if this machine will be a good choice for your therapy, please call one of our CPAP specialists and we will be happy to help you. 


Specification:-
Machine TypeBiPAP/BiLevel
Brand/Manufacturer:Philips Respironics
Weight:3 lb
Dimensions:7" x 5.5" x 4"
Noise Level:30 dB
Warranty:2 year
Data Card:Yes
Software Available:No
Ramp:0 - 45 min.
Exhalation Relief:Bi-FLEX
Pressure Range:4-25 cm/H2O
Altitude Adjustment:Automatic
Heated Humidifier:Available
110 Voltage:Yes
220 Voltage:Yes
Can Use A Battery:No
Integrated Battery:No
Mask Off Alert:Yes
Included In Box:BiPAP S/T machine, Tubing, Filters, User manuals, and Travel Bag

 

Enquiry Form

Captcha